40mm 11bar Stainless Steel Pressure Gauge for Water System Discription
The dial size is 40mm/1.5″. Case&beze material is 304 stainless steel, connection is stainless steel.
It is glycerin filled pressure gauge, so it is resistant with long shelf life.
40mm 11bar Stainless Steel Pressure Gauge for Water System Application
1, Used for hydraulic and pneumatic systems, compressors, compressed air system, hydraulic equipment
2, Suitable for fluid medium which does not clog thread or brass.
3, Used for providing protection from vibration and pulsation.
Specification
| Size(mm) | 40 |
| Nominal size | 1.5“ |
| Scale range | 0-11bar/psi |
| Accuracy | 2.5%FS |
| Connection | 1/8″ |
| Thread | PT( NPT&BSP are approved) |
| Wetted parts | 316stainless steel |
| Pointer/Dial | Aluminum Finished |
| Operating Temperature | -70℃-150℃ |
| Media Temperature | 200℃ maximum |
| Filling | Glycerine oil or silicone oil |
| Pressure Limitation | Steady:75% of scale value Fluctuating: 65% of full scale value Short time:100% of full scale value |
| Window | Tempered Glass, Polycarbonate |
| Case | 304 Stainless steel, or 316 Stainless steel |
How to Instalation and Use Pressure gauge
1, When install the pressure gauge, please hold the pressure gauge boday with your hand, turn into the main tooth about 2 teeth deep, correct the teeth, not bend or squeeze hardly
2, When install the pressure gauge, use special tools to fix the thread and then lock it with the machine. To avoid causing the thread and shell disconnect, and cause damage
3, After the instrument installed, mkae the dial plate face the operator.
